CCNA, CCDA, CCNP, CCDP, CCIP, CCVP and CCIE
4 posts • Page 1 of 1
I have been trying to solve this packet tracer lab TroubleShooting Enterprise Networks 1, score 62%. Below are the modifications that score: 12% DHCP enabled on PC17% config S2 as VTP client6% add vlan 30 to S36% add vlan 11 to S37% set no passive-interface S0/0/0 on Router 17% set no passive-interface S0/0/1 on Router 16% set no passive-interface fa0/1 on Router 16% assign port S3 F0/2 to vlan 300% change vtp domain on S3 to CCNA_troubleshooting6% add vlan 11 to S3 fa0/1 trunk There is no check Items, I can find anything else to fix.Most appreciate if anyone could help so that I can complete Lab 8.5.2 and Lab 8.5.3 as well.
Yes, I will like to have the final configurations. I score another 7% by adding another no passive-int on Fa0/0 on R1.But why do i have to make Fa0/0 non passive, Fa0/0 has no RIP device exists on that LAN therefore no need to send out unneeded updates isn it? On R2, i can tell the purpose of private ACL applied on Lo0. Also not sure the benefits of Anti-spoofing ACL on FA0/1.NAT statement is strange, tried to modify it to "ip nat inside source list NAT interface Loopback0 overload" but received syntax error. Thanks for your reply
could you please help me? I am stuck at 93% (that is 1 item missing) and everything can ping everything. I think it could be this "R2 must have secure login procedures because it is the Internet edge router"but I dont know what they want me to configuretried login local on vty, enable secret, enable password, aaa new-model but still no joy please I am curios what I missed.Thank you very much.Martin