EASy install problem

MIBS, SMMPv1, SMMPv2, SMMPv3 and management
Guest

EASy install problem

Post by Guest » Tue Dec 14, 2010 9:06 pm

I have Version 12.424T3 on my 3845. I am trying to install the easy-packet-capture.tar I downloaded from the EASy download site. I get this error after I run the easy-installer script: Router#easy-installer tftp://xx.xx.xx.xx/easy-packet-capture.tar flash:/easyLoading easy-installer.tcl from xx.xx.xx.xx (via GigabitEthernet0/0): ![OK - 39496 bytes] ERROR: Failed to import the package configuration: couldn read file"flash:/easy/easytmpULh79s/pkgconfig": File not found Thanks in advance. Delfino

Guest

Re:EASy install problem

Post by Guest » Tue Dec 14, 2010 10:39 pm

Post the easy-packet-capture.tar package you
e using.

Guest

Re:EASy install problem

Post by Guest » Tue Dec 14, 2010 11:46 pm

Here are the two files that I have using to install the easy-packet-capture. Kind regards, Delfino

Guest

Re:EASy install problem

Post by Guest » Wed Dec 15, 2010 1:24 am

Below is the result when I run the easy-installer with debug:  ERROR: Failed to import the package configuration: couldn read file"flash:/easy/easytmpULh79s/pkgconfig": File not found Router#easy-installer --debug tftp://xx.xx.xx.xx/easy-packet-capture.tar flash:Loading easy-installer.tcl from xx.xx.xx.xx (via GigabitEthernet0/0): ![OK - 39496 bytes] INFO: exec_cli: Running command show event manager environment __easy_PREFIX INFO: exec_cli: Output from command: No such environment variable defined. INFO: exec_cli: Running command show running | include ^file prompt quiet INFO: exec_cli: Output from command: \ INFO: exec_cli: Running command mkdir flash:/easytmpth4DAt INFO: exec_cli: Output from command: Created dir flash:/easytmpth4DAt INFO: exec_cli: Running command archive tar /xtracttftp://xx.xx.xx.xx/easy-packet-capture.tar flash://easytmpth4DAt INFO: exec_cli: Output from command: extracting ap_easy_epc_export.tcl (8437bytes) %Error opening flash://easytmpth4DAt/ap_easy_epc_export.tcl (I/O Error onread) ERROR: Failed to extract tftp://xx.xx.xx.xx/easy-packet-capture.tar to flash:/:Error extracting the package: I/O Error on read\

Guest

Re:EASy install problem

Post by Guest » Wed Dec 15, 2010 2:20 am

Looks like there is a problem loading the package file from TFTP.  You
e getting an I/O error.  Can you copy the tar file to the devices flash using a different copy method, then run easy-installer against the local copy of the tar file?  I tested the tar file you posted here, and it works fine for me locally.

Post Reply