IPsec, L2TP, Split tunneling, PPTP and all other VPN related posts.
2 posts • Page 1 of 1
Hi, Recently weve installed an ASA5505 and enabled VPN access.Two of my colleagues have no problems connecting to the VPN using the Cisco AnyConnect VPN Client but I do.I always get disconnected after a few seconds with the message: "A VPN reconnect resulted in different configuration settings. The VPN network interface is being re-initialized. Applications utilizing the private network may need to be restarted." Cisco AnyConnect VPN Client Version 2.5.2019 Im working with Windows 7 but the the same thing happens when I try to connect using my home computer that is running Windows Vista. My colleagues also use Win7 I also tried disabling Windows Firewall. Any help would be appreciated. Best regards, Peter
Peter I wonder if there is significance that 2 of your colleagues work and you do not? By default the ASA has licenses for 2 SSL VPN connections (which would be AnyConnect). Does this ASA have additional licenses for SSL/AnyConnect? If you are not sure, the answer can be found in the output of show version (and depending on the version of code running in the ASA also in output of show license). HTH Rick
Peter Thanks for the additional information. I wonder if there are any helpful messages in the log of the ASA. Perhaps you could have someone monitoring or capturing the logs of the ASA while you attempt your VPN connection. (That does assume that you have enabled logging on the ASA at an appropriate level.) I also wonder what would be the result if you were to reboot the ASA and then were to connect to VPN from your PC before your colleagues connect to VPN from their PCs. HTH Rick