CCME login soft key for 6921/41

Cisco CallManager, Cisco CallManager Express and IP Video
Guest

CCME login soft key for 6921/41

Post by Guest » Tue Jan 11, 2011 4:36 pm

Hi, i have a Cisco 2921 running CCME 8.0, im using callblocking overrride with the login softkey. Everything works well with  7962 phones but recently this feature stops working on 6941/21 phones; sometimes when you chek the configuration via GUI the login feature dos not appear then you need to configure it via CLI; the problem is that on some phones configured via CLI , the login softkey stops working and to fix the problem you need to erase the phone and configure it again. Here are my software versions and phone fimware:  CCME 8.0IOS ver:  c2900-universalk9-mz.SPA.151-2.T2.binPhone firmware:  SCCP69xx.9-0-2-0.loads                          Another question, how can i restrict user access to settings button on the phone 7942 and 6900, i don want user can change ip settings. I tried configuring this way, but it didn work:  ephone-template  1 service phone settingsAccess 0 ephone  1 mac-address B4A4.E329.4931 ephone-template 1 button  1:1  Thank You.

Guest

Re:CCME login soft key for 6921/41

Post by Guest » Tue Jan 11, 2011 4:50 pm

The GUI has too many bugs and limitation, it cannot be used. Use CLI only. Regarding the other question, if you can prove its a bug, contact the TAC and demand a solution.

Guest

Re:CCME login soft key for 6921/41

Post by Guest » Tue Jan 11, 2011 4:54 pm

In the case of the login softkey i configure it via CLI, but sometimes stop working and then i need to reconfigure it again. Do you think this could be a bug  too?

Post Reply