Linksys, Netgear, ect. Webbase configurations for switches or layer 2 devices.
1 post • Page 1 of 1
I bought My SRW 2024 on the internet, it is delevered to me without the serial cable. How can I get/buy such a cable? I need the cable because I made a mistake and the switch is not manageble by web because of that any more. The management is connectet to a vlan where no ports are connected to any more. Thanks for helping.
I would recommend contacting your distributor/vendor for a cable as one should be included with all valid orders. Barring that any standard 9-pin (DB9) serial cable that could be purchased from an electronics dealer such as Fryes Electronics, Micro Center, etc. should suffice. Best Regards,
Yeah, it definatly should have come with one.However, I believe the SRW has a male serial port on it.So, if you wanted to pick a serial cable up your self, it would be a straight through female-female serial cable (as opposed to a null-modem serial cable).
Hey team, Here is a similar link by Super Dave:https://www.myciscocommunity.com/message/33923 If you have a pair of the db9 adapters, you can try a straight cable in between. Another link, might also work ...:http://www.diablocable.com/linksys-srw- ... cable.html HTH, Andrew
Thanks. I bought a cable on a local cablestore. I can mannage my switch again, and fixed my own mistake.